Edge-Core ECS4510-28P User Manual page 272

| Class of Service
C 10
HAPTER
Layer 2 Queue Settings
weighted service for the remaining queues. Use this parameter to
specify the queues assigned to use strict priority. (Default: Disabled)
Weight – Sets a weight for each queue which is used by the WRR
◆
scheduler. (Range: 1-255; Default: Weights 1, 2, 4, 6, 8, 10, 12 and 14
are assigned to queues 0 - 7 respectively)
W I
EB NTERFACE
To configure the queue mode:
Click Traffic, Priority, Queue.
1.
Set the queue mode.
2.
If the weighted queue mode is selected, the queue weight can be
3.
modified if required.
If the queue mode that uses a combination of strict and weighted
4.
queueing is selected, the queues which are serviced first must be
specified by enabling strict mode parameter in the table.
Click Apply.
5.
Figure 128: Setting the Queue Mode (Strict)
Figure 129: Setting the Queue Mode (WRR)
– 272 –