Edge-Core ECS4510-28P User Manual page 521

To configure detailed settings for maintenance domains:
1.
2.
3.
4.
5.
6.
Figure 297: Configuring Detailed Settings for Maintenance Domains
Use the Administration > CFM (Configure MA) pages to create and
C CFM
ONFIGURING
configure the Maintenance Associations (MA) which define a unique CFM
M
AINTENANCE
service instance. Each MA can be identified by its parent MD, the MD's
A
SSOCIATIONS
maintenance level, the VLAN assigned to the MA, and the set of
maintenance end points (MEPs) assigned to it.
CLI R
◆
C
Creating a Maintenance Association
◆
◆
Click Administration, CFM.
Select Configure MD from the Step list.
Select Configure Details from the Action list.
Select an entry from the MD Index.
Specify the MEP archive hold and MEP fault notification parameters.
Click Apply
EFERENCES
"CFM Commands" on page 1293
U
OMMAND SAGE
Use the Configure MA – Add screen to create an MA within the selected
MD, map it to a customer service instance (S-VLAN), and set the
manner in which MIPs are created for this service instance. Then use
the MEP List to assign domain service access points (DSAPs) to this
service instance (see
page 526).
An MA must be defined before any associated DSAPs or remote MEPs
can be assigned (see
page 527).
– 521 –
| Basic Administration Protocols
C 14
HAPTER
Connectivity Fault Management
"Configuring Maintenance End Points" on
"Configuring Remote Maintenance End Points" on