Edge-Core ECS4510-28P User Manual page 641

C S
ONFIGURING TATIC
DNS H
OST TO
A E
DDRESS NTRIES
Figure 386: Showing the List of Name Servers for DNS
Use the IP Service > DNS - Static Host Table (Add) page to manually
configure static entries in the DNS table that are used to map domain
names to IP addresses.
CLI R
EFERENCES
"ip host" on page 1348
◆
"show hosts" on page 1352
◆
C U
OMMAND SAGE
Static entries may be used for local devices connected directly to the
◆
attached network, or for commonly used resources located elsewhere
on the network.
P
ARAMETERS
These parameters are displayed:
Host Name – Name of a host device that is mapped to one or more IP
◆
addresses. (Range: 1-127 characters)
IP Address – IPv4 or IPv6 address(es) associated with a host name.
◆
W I
EB NTERFACE
To configure static entries in the DNS table:
Click IP Service, DNS, Static Host Table.
1.
Select Add from the Action list.
2.
Enter a host name and the corresponding address.
3.
Click Apply.
4.
– 641 –
| IP Services
C 17
HAPTER
Domain Name Service