Edge-Core ECS4510-28P User Manual page 190

| Interface Configuration
C 5
HAPTER
Traffic Segmentation
Interface – Displays a list of ports or trunks.
◆
Port – Port Identifier. (Range: 1-28/52)
◆
Trunk – Trunk Identifier. (Range: 1-16)
◆
W I
EB NTERFACE
To configure the members of the traffic segmentation group:
Click Interface, Traffic Segmentation.
1.
Select Configure Session from the Step list.
2.
Select Add from the Action list.
3.
Enter the session ID, set the direction to uplink or downlink, and select
4.
the interface to add.
Click Apply.
5.
Figure 61: Configuring Members for Traffic Segmentation
To show the members of the traffic segmentation group:
Click Interface, Traffic Segmentation.
1.
Select Configure Session from the Step list.
2.
Select Show from the Action list.
3.
Figure 62: Showing Traffic Segmentation Members
– 190 –