Edge-Core ECS4510-28P User Manual page 467

Click Apply
5.
Figure 264: Creating SNMP Notification Logs
To show configured SNMP notification logs:
Click Administration, SNMP.
1.
Select Configure Notify Filter from the Step list.
2.
Select Show from the Action list.
3.
Figure 265: Showing SNMP Notification Logs
Use the Administration > SNMP (Show Statistics) page to show counters
S SNMP
HOWING
for SNMP input and output protocol data units.
S
TATISTICS
CLI R
◆ "show snmp" on page 787
P
ARAMETERS
The following counters are displayed:
SNMP packets input – The total number of messages delivered to the
◆
SNMP entity from the transport service.
Bad SNMP version errors – The total number of SNMP messages
◆
which were delivered to the SNMP entity and were for an unsupported
SNMP version.
◆ Unknown community name – The total number of SNMP messages
delivered to the SNMP entity which used a SNMP community name not
known to said entity.
EFERENCES
– 467 –
| Basic Administration Protocols
C 14
HAPTER
Simple Network Management Protocol