Table 72: Authentication Commands - Edge-Core ECS4510-28P User Manual

26
A
UTHENTICATION
You can configure this switch to authenticate users logging into the system
for management access using local or remote authentication methods.
Port-based authentication using IEEE 802.1X can also be configured to
control either management access to the uplink ports or client access
the data ports.

Table 72: Authentication Commands

Command Group Function
User Accounts and Configures the basic user names and passwords for management
Privilege Levels access, and assigns a privilege level to specified command groups
or individual commands
Authentication Sequence Defines logon authentication method and precedence
RADIUS Client Configures settings for authentication via a RADIUS server
TACACS+ Client Configures settings for authentication via a TACACS+ server
AAA Configures authentication, authorization, and accounting for
network access
Web Server Enables management access via a web browser
Telnet Server Enables management access via Telnet
Secure Shell Provides secure replacement for Telnet
802.1X Port Configures host authentication on specific ports using 802.1X
Authentication
Management IP Filter Configures IP addresses that are allowed management access
PPPoE Intermediate Configures relay parameters required for sending authentication
Agent messages between a client and broadband remote access servers
24. For other methods of controlling client access, see
page 885.
– 821 –
C
OMMANDS
"General Security Measures" on
to
24