Changing The Aging Time - Edge-Core ECS4510-28P User Manual

C A
HANGING THE GING
Figure 96: Displaying Static MAC Addresses
T
IME
Use the MAC Address > Dynamic (Configure Aging) page to set the aging
time for entries in the dynamic address table. The aging time is used to
age out dynamically learned forwarding information.
CLI R
EFERENCES
"mac-address-table aging-time" on page 1051
◆
P
ARAMETERS
These parameters are displayed:
Aging Status – Enables/disables the function.
◆
Aging Time – The time after which a learned entry is discarded.
◆
(Range: 6-672 seconds; Default: 300 seconds)
W I
EB NTERFACE
To set the aging time for entries in the dynamic address table:
Click MAC Address, Dynamic.
1.
Select Configure Aging from the Action list.
2.
Modify the aging status if required.
3.
Specify a new aging time.
4.
Click Apply.
5.
Figure 97: Setting the Address Aging Time
– 229 –
| Address Table Settings
C 7
HAPTER

Changing the Aging Time