Configuring Voip Traffic Ports - Edge-Core ECS4510-28P User Manual

| VoIP Traffic Configuration
C 12
HAPTER

Configuring VoIP Traffic Ports

C V IP T
ONFIGURING O
Select a mask from the pull-down list to define a MAC address range.
5.
Enter a description for the devices.
6.
Click Apply.
7.
Figure 148: Configuring an OUI Telephony List
To show the MAC OUI numbers used for VoIP equipment:
Click Traffic, VoIP.
1.
Select Configure OUI from the Step list.
2.
Select Show from the Action list.
3.
Figure 149: Showing an OUI Telephony List
P
RAFFIC ORTS
Use the Traffic > VoIP (Configure Interface) page to configure ports for
VoIP traffic, you need to set the mode (Auto or Manual), specify the
discovery method to use, and set the traffic priority. You can also enable
security filtering to ensure that only VoIP traffic is forwarded on the Voice
VLAN.
CLI R
EFERENCES
"Configuring Voice VLANs" on page 1158
◆
– 302 –