Edge-Core ECS4510-28P User Manual page 950

28/52-port layer 2+
Hide thumbs Also See for ECS4510-28P:
Table of Contents

Advertisement

| Access Control Lists
C
28
HAPTER
IPv4 ACLs
permit, deny
(Extended IPv4 ACL)
This command adds a rule to an Extended IPv4 ACL. The rule sets a filter
condition for packets with specific source or destination IP addresses,
protocol types, source or destination protocol ports, or TCP control codes.
Use the no form to remove a rule.
S
YNTAX
{permit | deny} [protocol-number | udp]
{any | source address-bitmask | host source}
{any | destination address-bitmask | host destination}
[precedence precedence] [dscp dscp]
[source-port sport [bitmask]]
[destination-port dport [port-bitmask]]
[time-range time-range-name]
no {permit | deny} [protocol-number | udp]
{any | source address-bitmask | host source}
{any | destination address-bitmask | host destination}
[precedence precedence] [dscp dscp]
[source-port sport [bitmask]]
[destination-port dport [port-bitmask]]
{permit | deny} tcp
{any | source address-bitmask | host source}
{any | destination address-bitmask | host destination}
[precedence precedence] [dscp dscp]
[source-port sport [bitmask]]
[destination-port dport [port-bitmask]]
[control-flag control-flags flag-bitmask]
[time-range time-range-name]
no {permit | deny} tcp
{any | source address-bitmask | host source}
{any | destination address-bitmask | host destination}
[precedence precedence] [dscp dscp]
[source-port sport [bitmask]]
[destination-port dport [port-bitmask]]
[control-flag control-flags flag-bitmask]
protocol-number – A specific protocol number. (Range: 0-255)
source – Source IP address.
destination – Destination IP address.
address-bitmask – Decimal number representing the address bits to
match.
host – Keyword followed by a specific IP address.
precedence – IP precedence level. (Range: 0-7)
dscp – DSCP priority level. (Range: 0-63)
sport – Protocol
25
dport – Protocol
port-bitmask – Decimal number representing the port bits to match.
(Range: 0-65535)
25. Includes TCP, UDP or other protocol types.
– 950 –
source port number. (Range: 0-65535)
destination port number. (Range: 0-65535)
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecs4510-28tEcs4510-52tEcs4510-28f

Table of Contents