Edge-Core ECS4510-28P User Manual page 388

| Security Measures
C 13
HAPTER
Configuring 802.1X Port Authentication
before it times out the authentication session. (Range: 1-10;
Default: 2)
Intrusion Action – Sets the port's response to a failed authentication.
◆
Block Traffic – Blocks all non-EAP traffic on the port. (This is the
■
default setting.)
Guest VLAN – All traffic for the port is assigned to a guest VLAN.
■
The guest VLAN must be separately configured (See
VLAN Groups" on page
"Configuring Network Access for Ports" on page
Supplicant List
◆ Supplicant – MAC address of authorized client.
Authenticator PAE State Machine
State – Current state (including initialize, disconnected, connecting,
◆
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
◆ Reauth Count – Number of times connecting state is re-entered.
Current Identifier – Identifier sent in each EAP Success, Failure or
◆
Request packet by the Authentication Server.
Backend State Machine
State – Current state (including request, response, success, fail,
◆
timeout, idle, initialize).
Request Count – Number of EAP Request packets sent to the
◆
Supplicant without receiving a response.
Identifier (Server) – Identifier carried in the most recent EAP
◆
Success, Failure or Request packet received from the Authentication
Server.
Reauthentication State Machine
State – Current state (including initialize, reauthenticate).
◆
– 388 –
196) and mapped on each port (See
"Configuring
330).