Ethernet; Dhcp Server - Billion BiGuard 2 User Manual

4.4.1.1 Ethernet

IP Address: Enter the internal LAN IP address for BiGuard 2/10 (192.168.1.254 by
default).
Subnet Mask: Enter the subnet mask (255.255.255.0 by default).
RIP: RIP v2 Broadcast and RIP v2 Multicast. Check to enable RIP.

4.4.1.2 DHCP Server

In this menu, you can disable or enable the Dynamic Host Configuration Protocol
(DHCP) server. The DHCP protocol allows your BiGuard 2/10 to dynamically assign
IP addresses to PCs on your network if they are configured to automatically obtain
IP addresses.
To disable the router's DHCP Server, select the Disable radio button, and then click
Apply. When the DHCP Server is disabled, you will need to manually assign a fixed
IP address to each PC on your network, and set the default gateway for each PC to
the IP address of the router (192.168.1.254 by default).
71