Installing The Transport Extender - Billion BIGUARD S5 Remote Portal Manual

Installing the Transport Extender

The Transport Extender enables you to access an encrypted path to another distant network,
and access applications that are on that network.
To use Transport Extender, connect to the web portal by first typing in the browser address bar
https://wanipaddress (where wanipaddress is the WAN IP address of the BiGuard SSL VPN
appliance). After you successfully connect to the device and successfully log in to the device,
the web portal screen appears. Please click Transport Extender in order to connect to the office
network. Follow the procedures below to use the Remote Portal.
1. Type the WAN IP Address or Domain Name in the Address bar of the browser and log
into the BiGuard SSL VPN remote portal as previously configured.
2. Click Transport Extender
3. If the browser does not launch ActiveX automatically, a warning message appears. Click
OK to continue. If the browser automatically installs ActiveX (the warning message does
not display), then go to Step 7.
4. Click the Information bar on the top of the page and click Install ActiveX Control.
U SSL VPN P
SING ORTAL
A 7
CCESS