Using Snmp To View And Configure Switch Authentication Features - HP ProCurve 6120G/XG Manual

RADIUS Authentication, Authorization, and Accounting

Using SNMP To View and Configure Switch Authentication Features

Using SNMP To View and Configure
Switch Authentication Features
SNMP MIB object access is available for switch authentication configuration
(hpSwitchAuth) features. This means that the switches covered by this Guide
allow, by default, manager-only SNMP read/write access to a subset of the
authentication MIB objects for the following features:
■
■
■
■
■
■
■
With SNMP access to the hpSwitchAuth MIB enabled, a device with manage­
ment access to the switch can view the configuration for the authentication
features listed above (excluding usernames, passwords, and keys). Using
SNMP sets, a management device can change the authentication configuration
(including changes to usernames, passwords, and keys). Operator read/write
access to the authentication MIB is always denied.
S e c u r i t y N o t e s
All usernames, passwords, and keys configured in the hpSwitchAuth MIB are
not returned via SNMP, and the response to SNMP queries for such informa­
tion is a null string. However, SNMP sets can be used to configure username,
password, and key MIB objects.
To help prevent unauthorized access to the switch's authentication MIB,
ProCurve recommends following the "SNMP Security Guidelines" on page 1-15.
If you do not want to use SNMP access to the switch's authentication config­
uration MIB, then use the snmp-server mib hpswitchauthmib excluded command
to disable this access, as described in the next section.
If you choose to leave SNMP access to the security MIB open (the default
setting), ProCurve recommends that you configure the switch with the SNMP
version 3 management and access security feature, and disable SNMP version
2c access. (Refer to "Access Security Features" on page 1-3.)
5-30
number of primary and secondary login and enable attempts
TACACS+ server configuration and status
RADIUS server configuration
selected 802.1X settings
key management subsystem chain configuration
key management subsystem key configuration
local switch operator and manager usernames and passwords