4.1 Operating Procedures
This chapter explains how to operate the HDK-65C camera.
■
Initial Operation Check
――――――――――――――
When you use the camera for the first time after purchase, ensure that it wor s properly.
◆
4.2 Switch Position Check
4.3 Turning ON Power
◆
4.5 Output Signal Check
◆
- Color-Bar Signal Chec
- Test Pulse Chec (CAL Signal)
- Chec by Use of External Chart
■
Preparation Before Shooting
―――――――――――――――――
Studio Operation
4.4 Viewfinder Adjustment
◆
- Diopter Adjustment and Screen Adjustment
- Display Mode Chec
◆
4.5 Output Signal Check
- Color-Bar Signal Chec
- Test Chec (CAL Signal)
- Chec by Use of External Chart
4.6 Auto Setup
◆
<Pattern 1>
1
LEVEL Auto Setup
2
Blac Shading
<Pattern 2>
1
Auto Blac Balance (ABB)
2
Auto White Balance (AWB)
<Pattern 3>
1
Blac Shading
2
Auto White Balance (AWB)
(Execute one of the above patterns.)
■
Shooting Settings and Adjustment
――――――――――――――――――――
Ma e IRIS and pedestal adjustments and various function settings according to the environment in which the
camera is used.
Camera menu settings
◆
See "5. CAMERA SETTINGS and ADJUSTMENT"
CCU menu settings
◆
Refer to the operation manual accompanying CCU-970 to be used.
Stand-alone/VTR Location Operation
◆
Shooting in a Particular Environment
4.4 Viewfinder Adjustment
◆
- Diopter Adjustment and Screen Adjustment
- Display Mode Chec
4.5 Output Signal Check
◆
- Color Bar Signal Chec
- Test Chec (CAL Signal)
- Chec by Use of External Chart
4.6 Auto Setup
◆
<Pattern 1>
<Pattern 2>
<Pattern 3>
(Execute one of the above patterns.)
HDK-65C 1501 VER1 (U)
4.1 Operating Procedures
1
QUICK Auto Setup
2
Auto White Balance (AWB)
1
Auto Blac Balance (ABB)
2
Auto White Balance (AWB)
1
Blac Shading
2
Auto White Balance (AWB)
4
57