Operation 44 - Fuses And Relays - New Holland T7030 Operator's Manual

OPERATION 44
FUSES AND RELAYS
The fuse box is located behind a panel on the top of
the right --hand control console.
To check or change fuses, remove the two screws
securing the panel to the console. The fuses and
relays are shown diagrammatically in Figures 126
and 127. In addition to the main fuses there are
additional 'maxi' fuses which are provided to protect
the main fuses and electrical circuit.
There is provision for 60 fuses although they may not
all be fitted to your tractor. In addition, certain items
of equipment may not be installed on your tractor.
However, the fuses for these features are still fitted
and may be used as spares.
IMPORTANT: Do not replace a blown fuse with
another of a different rating.
The fuses are numbered and colour--coded. Their
position and rating are shown in the chart on the next
page.
More relays are located behind the front of the
right--hand control console, Figure 124.
In addition to the fuses in the internal fuse box , there
are also extra fuses located on the battery tray. A
250 amp 'MEGA' fuse (1) which protects the main
electrical system and three 30 amp fuses (2) which
protect the front lift electrical system, electronics
supply and implement ISO BUS circuit (where fitted).
SECTION 4 - - LUBRICATION AND MAINTENANCE
123
124
125
4--65