Visual Displays - New Holland T7030 Operator's Manual

The joystick may also be moved laterally, (R) and (L),
to extend or retract a cylinder.
By moving the joystick diagonally, two cylinders may
be operated simultaneously.
NOTE: With the joystick operating the rear electronic
remote valves, the float (F) position for valves 2 and
4 (lateral movement of the joystick) are not available.
To switch control of the rear valves back to the levers,
depress the top of the selector switch, the rear
indicator lamp will go out and the mid--mount
indicator lamp will start to flash. After two seconds
the mid--mount lamp will stay on confirming joystick
operation has now been switched back to the
mid--mount valves (where fitted).
Operation of the rear remote valves is now
transferred to lever control.

Visual Displays

Depress the remote valve key on the keypad and the
following information will be displayed in the DMD for
each valve:
1. Momentary oil flow from the valve. The shaded
area represents the percentage of oil flow, this
will change as the flow increases or decreases.
2. Maximum flow rate (%) as set by the operator.
The extend/retract directional arrows represent
the maximum flow setting.
3. Number of the remote valve in operation.
4. Direction of cylinder movement, extend (Raise)
or retract (Lower). The direction of cylinder travel
is identified by the arrow.
SECTION 3 - - FIELD OPERATIONS
4
125
3
126
3--79