Power Command Transmission; Ground Speed Charts - New Holland T7030 Operator's Manual

SECTION 2 - - CONTROLS, INSTRUMENTS AND OPERATION
POWER COMMANDT TRANSMISSION
Power Command is an electronically controlled full
powershift transmission of an advanced design that
offers many automated functions for easier
operation.
Subject to legal requirements in your country, the
following transmissions are available
50 km/h transmission.
19 forward and 6 reverse ratios
IMPORTANT: When travelling at high road speeds
with trailed or semi- -mounted equipment attached to
the tractor, ensure the equipment is rated for 50 km/h
operation in respect to its construction, brakes and
tyres.
40 km/h Economy transmission
19 forward and 6 reverse ratios.
40 km/h transmission
18 forward and 6 reverse ratios
plus optional 10 x 6 creeper range.
30 km/h transmission
17 forward and 6 reverse ratios
(18th. gear cannot be selected)
plus optional 10 x 6 creeper range.
Details of creeper gear operation will be found on
page 2--81.
IMPORTANT: A tractor fitted with Power Command
transmission cannot be tow- -started and must not be
towed other than to remove it from a field or onto a
trailer or truck. When towing the tractor, the speed
should not exceed 5k/mh (3.1 MPH) with the engine
switched off, or 10 k/mh (6.2 MPH) with the engine
running.

GROUND SPEED CHARTS

The ground speed of your tractor may be displayed
on the instrument panel. If your tractor is equipped
with radar then the ground speed displayed will be a
true reading. Tractors without radar will display a
ground speed that is subject to minor inaccuracies
due to the effects of wheel slip, tyre pressures,
change of tyre size, etc.
The charts starting on page 2--83 show the ground
speeds in km/h and MPH. To find the road speed for
your tractor in any given gear ratio, use the column
with your rear tyre size in the heading.
2--66
114