SECTION 2 - - CONTROLS, INSTRUMENTS AND OPERATION
Swivel adjustment
To facilitate observation of an implement attached to
the rear of the tractor, the seat may be allowed to
swivel. Adjustment is available as follows:
a) Lock in one of two positions 14° or 21° to the left
of centre.
b) Lock in one of three positions at 7°, 14° and 21°
to the right of centre.
To swivel the seat, lift the handle (4), then rotate the
seat to the required position. When the lever is
released, the seat will lock at the selected angle.
Backrest inclination adjustment
Lift the lever (1) on the left-hand side of the seat
frame and adjust the inclination of the backrest. The
backrest will lock in position when the lever is
released.
Travel isolator
Having selected the required fore/aft position, the
seat is permitted a limited, spring controlled, fore/aft
movement (float) if the travel isolator (2) is pulled up.
This, in conjunction with the air suspension, will
provide the optimum in ride comfort. To cancel the
float movement, push the travel isolator down while
slowly moving the seat fore and aft until the seat
locks in position.
2--26
49