ROTATING BEACON
The beacon switch is located in the control panel in
the roof. Press in the button identified with the
beacon symbol to provide power to the rotating
beacon socket outlet.
NOTE: Less cab models will have the beacon switch
located on the main switch panel on the right- -hand
control console.
The roof beacon kit consists of a rotating beacon,
support bracket and fitting hardware to attach to the
roof of the tractor.
A socket connected to the tractor electrical circuit (1),
is provided each side of the cab at the rear of the
tractor. When not in use, ensure the socket cover is
replaced to prevent water ingress.
AUXILIARY HEADLIGHTS
A set of additional dipping headlights are available for
use with front mounted equipment. Located on the
upper right and left--hand grab rails, the headlight
beams pass over front mounted equipment to
illuminate the road ahead.
To turn on the auxiliary headlights, depress the
switch on the lower left side of the instrument panel.
When switched on the auxiliary headlight beams
may be dipped using the multi--function switch on the
left of the steering column.
6--4
SECTION 6 - - ACCESSORIES
7
8
9