2WD Axle, Outer Steering Components and
Front Hubs
Apply a grease gun to the lubrication fittings, as
shown. (Wheel removed for clarity).
NOTE: The illustration identifies the right side
lubrication fitting, this is repeated on the right side of
the axle.
2WD Axle, Centre Steering Components
Apply a grease gun to the lubrication fittings, as
shown.
Front Trunnion Pin (standard 4WD axle)
Apply a grease gun to the lubrication fitting, as
shown.
Rear Trunnion Pin (standard 4WD axle)
Apply a grease gun to the lubrication fitting, as
shown.
SECTION 4 - - LUBRICATION AND MAINTENANCE
30
31
32
33
4--21