OPERATION 16
ADJUST PARKING BRAKE
Block the front wheels, jack up the rear of the tractor
and support the rear wheels just clear of the ground.
Unlatch the brake pedals.
Apply the parking brake so that the 4th. notch of the
ratchet is engaged. Remove or ease back the rubber
boot, loosen the locknuts and turn the adjuster nuts
on the operating cables until both wheels start to
lock. Release the parking brake and ensure that both
wheels are free to rotate. Re--apply the parking brake
to ensure that the system operates freely. Tighten
the locknuts.
Road test, using the parking brake to stop the tractor.
The tractor should stop in a straight line if the cables
have been correctly adjusted.
OPERATION 17
CHECK FRONT P.T.O. GEARBOX OIL LEVEL
Remove the combined level/filler plug (1) and ensure
that the oil reaches the bottom of the opening. If
necessary, top up through the opening with clean oil
and replace the plug.
See page 4--8 for the correct oil specification.
4--32
SECTION 4 - - LUBRICATION AND MAINTENANCE
59
60