Field Operations; Before Operating; Programming Tractor Functions - New Holland T7030 Operator's Manual

BEFORE OPERATING

CAUTION
Before driving or operating the tractor, study the
safety precautions in Section 1 of this Manual.
Read this section carefully for a thorough
understanding of operational requirements. Even if
you operate other tractors, you should thoroughly
read this section of the manual and ensure that you
are familiar with the location and function of all the
features of your tractor.
Do not start the engine or attempt to drive or operate
the tractor until you are fully accustomed with all the
controls. It is too late to learn once the tractor is
moving. If in doubt about any aspect of operation of
the tractor, consult your authorised dealer.

PROGRAMMING TRACTOR FUNCTIONS

Your tractor is equipped with a sophisticated
electronic network system which utilises various
memory facilities to programme and control many of
the tractor functions. The operating memory
temporarily stores settings and adjustments made
while operating the tractor and these are transferred
to the main memory when you key--off (engine stop).
If you key--off and key--on again too quickly as data
is being transferred between the operating and main
memories, some of the data may be lost or
corrupted.
If changes have been made to any memory settings
while operating the tractor, pause for five seconds
between key--off and key--on to allow sufficient time
for data to transfer between the operating memory
and the main memory. Once transferred, the new
settings will remain unchanged until they are
re--programmed.
SECTION 3

FIELD OPERATIONS

Page
Important Information
Boosting the Tractor Battery
Starting the Engine
Stopping the Engine
Engine Power Management (EPM)
Engine Speed Management (ESM)
Headland Turn Sequence (HTS)
Fast Steer
Rear Power Take--Off
Front Power Take--Off and Hydraulic Lift
Electronic Draft Control
Load Sensing Remote Control Valves
Electronic Remote Control Valves
Continuous Oil Supply for Remote Services
Three-point Hitch
Quick Hitch
Linkage Stabilisers
Drawbars and Towing Attachments
Trailer Braking Systems
Front Wheel Track Adjustment
Rear Wheel Track Adjustment
Ballasting and Tyres
Subject
3--2
3--4
3--5
3--8
3--10
3--11
3--13
3--24
3--26
3--40
3--57
3--69
3--75
3--90
3--93
3--99
3--101
3--106
3--119
3--126
3--134
3--144
3--1