Operation; Controls And Instruments; Seat, Seat Belt And Rollover Protective Structure (Rops); Adjusting The Seat Belt - New Holland TC21D Operator's Manual

SEAT, SEAT BELT, AND ROLLOVER
PROTECTIVE STRUCTURE (ROPS)
Adjusting the Tractor Seat
Your New Holland tractor is equipped with an
adjustable suspension seat.
To move the seat fore and aft, raise the release lever,
1. Because the seat is on an inclined base, more
effort is required to move the seat rearward than
forward.

ADJUSTING THE SEAT BELT

The male end of the seat belt, 2, is part of a retraction
mechanism, located on the left side of the seat. To
extend length of seat belt, pull out on male end until
correct length is obtained. To latch belt, insert male
end, 2, into belt latch, 3, located on right side of seat.
Be sure belt is securely latched and belt length is
adjusted correctly for size of operator.
Use soap and water to clean the seat belt if
necessary. Do not use carbon tetrachloride,
naphtha, etc., as these substances will weaken the
webbing. Additionally, do not bleach or redye the
webbing, as these products will also weaken the
webbing.
Replace the seat belt if it becomes damaged or worn.
SECTION 2

OPERATION

CONTROLS AND INSTRUMENTS

19984109
2-1
3
10020238
1
1
2
2