Ride Firmness Selector; Seat Controls; Cushion Tilt; Cushion Extension - New Holland T7030 Operator's Manual

SECTION 2 - - CONTROLS, INSTRUMENTS AND OPERATION
Ride firmness selector (where fitted)
The optional Semi--Active suspension system
utilises an advanced damper system to reduce
vertical jolts and vibrations caused by operating on
rough terrain.
An electronic controller constantly monitors the
motion of the suspension and updates the damping
effect to significantly improve operator comfort.
A selector switch (3) allows the operator to choose
the most comfortable damping position consistent
with their weight and the movement of the tractor.
With the switch in the central position, the firmness
of the ride will suit most average conditions.
Depress the top of the switch to increase the
damping effect.
To reduce the damping effect, depress the bottom of
the switch.

Seat Controls

Cushion tilt

The angle of the seat cushion may be adjusted to
three positions. Lift the lever (1) and pull or push the
front of the seat cushion up or down, as required. The
seat cushion will lock in position when the lever is
released.

Cushion extension

To suit drivers of differing heights, the length of the
seat cushion may be adjusted by up to 60 mm (2.4
in). Lift the lever (3) and move the cushion forward or
rearward, as required. The cushion will lock in
position when the lever is released.
Travel adjustment
Lift the travel adjustment lever (2) and move the
complete seat forward or backward, as required. The
seat will lock in position when the lever is released.
47
48
2--25