New Holland T7.150 Service Manual
  1. Manuals
  2. Brands
  3. New Holland Manuals
  4. Tractor
  5. T7.150
  6. Service manual

New Holland T7.150 Service Manual

Hide thumbs Also See for T7.150:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
T7.150 / T7.180
Tractor
Part number 48079508
English
July 2017
© 2017 CNH Industrial Latin America LTDA. All Rights Reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T7.150 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for New Holland T7.150

Summary of Contents for New Holland T7.150

  • Page 1 SERVICE MANUAL T7.150 / T7.180 Tractor Part number 48079508 English July 2017 © 2017 CNH Industrial Latin America LTDA. All Rights Reserved.
  • Page 2 SERVICE MANUAL T7.150 PIN HCCZ, With cab, Tier 0, Exported, 15x12 T7.150 PIN HCCZ, Without cab, Tier 0, Exported, 15x12 T7.180 PIN HCCZ, With cab, Tier 0, Exported, 15x12 T7.180 PIN HCCZ, Without cab, Tier 0, Exported, 15x12 48079508 27/07/2017...
  • Page 3 Product Market Product Engine T7.150 PIN HCCZ, Without cab, Middle East Africa F4CE0654F*B601 Tier 0, Exported, 15x12 T7.150 PIN HCCZ, With cab, Tier Middle East Africa F4CE0654F*B601 0, Exported, 15x12 T7.180 PIN HCCZ, Without cab, Middle East Africa F4CE0654H*B601 Tier 0, Exported, 15x12 T7.180 PIN HCCZ, With cab, Tier...
  • Page 4 Contents INTRODUCTION Engine..................10 [10.216] Fuel tanks ................10.1 [10.218] Fuel injection system .
  • Page 5 [35.600] High flow hydraulics ..............35.3 [35.114] Three-point hitch control valve .
  • Page 6 INTRODUCTION 48079508 27/07/2017 Find manuals at https://best-manuals.com...

  • Page 7: Table Of Contents

    Contents INTRODUCTION Foreword - How to use and navigate through this manual ........3 Foreword - Important notice regarding equipment servicing .

  • Page 8: Foreword - How To Use And Navigate Through This Manual

    INTRODUCTION Foreword - How to use and navigate through this manual This manual has been produced by a new technical information system. This new system is designed to deliver technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
  • Page 9 INTRODUCTION Manual content This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at the end of each Chapter.
  • Page 10 INTRODUCTION 61 - Metering system 62 - Pressing - Bale formation 63 - Chemical applicators 64 - Chopping 66 - Threshing 68 - Tying/Wrapping/Twisting 69 - Bale wagons 70 - Ejection 71 - Lubrication system X X X X X 72 - Separation 73 - Residue handling 74 - Cleaning...
  • Page 11 INTRODUCTION Chapters Each Chapter is identified by a number e.g. Engine - Engine and crankcase - 10.001. The first number is identical to the Section number i.e. Chapter 10.001 is inside Section 10, Engine. The second number is representative of the Chapter contained within the Section.
  • Page 12 INTRODUCTION Information units and information search Each chapter is composed of information units. Each information unit has the SAP code shown in parentheses. This indicates the function and type of information in that information unit. Each information unit has a page reference within that Chapter.

  • Page 13: Foreword - Important Notice Regarding Equipment Servicing

    Specifications, descriptions, and illustrative material herein are as accurate as known at time of publication but are subject to change without notice. In case of questions, refer to your NEW HOLLAND Sales and Service Networks. 48079508 27/07/2017...

  • Page 14: Safety Rules

    INTRODUCTION Safety rules SAFETY NORMS General Aspects • Strictly follow repair and maintenance procedures. • Do not wear rings, wrist watches, jewelry, accessories, unbuttoned items of clothing, unsecured clothing like ties, torn clothing, scarves, or open jackets or shirts with open zippers that could get caught in moving parts. Use ap- proved safety clothing, such as anti-slip footwear, sleeves, protective goggles, helmets etc.
  • Page 15 INTRODUCTION ELECTRICAL SYSTEMS • If it is necessary to use auxiliary batteries, you must connect the cables on both sides as follows: (+) to (+) and (-) to (-). Avoid causing the terminals to short circuit. GAS RELEASED FROM BATTERIES IS HIGHLY FLAMMABLE. During charging, leave the battery compartment open to improve ventilation.
  • Page 16 INTRODUCTION ADHESIVES AND SEALANTS See Fire. Highly flammable, flammable, combustible. In general, you must store them in “No smoking” areas. You must take care as regards cleaning and organization during use, e.g. workbenches covered with paper towels; use applicators wherever possible; containers, including secondary containers, must be labeled.
  • Page 17 INTRODUCTION The gases released during charging are explosive. Never allow naked flames or sparks near batteries that are charging or have recently been charged. BRAKE AND CLUTCH FLUIDS (polyalkylene-glycol) See Fire. Combustible. Splashes on the skin and in the eyes cause mild irritation. Avoid contact with the eyes and the skin as far as possible.
  • Page 18 INTRODUCTION Clutch pads and linings See Brake and clutch pads and linings. ANTI-CORROSIVE PROTECTIVE MATERIAL See Solvents, Fire. Highly flammable, flammable. These materials are varied and you must follow the manufacturers' instructions. They may contain solvents, resins, petroleum derivatives etc. You must avoid contact with the skin and the eyes. You must carry out spraying with adequate ventilation and never in enclosed spaces.
  • Page 19 INTRODUCTION FIBER INSULATION See Dust. Used for soundproofing. The fibrous nature of cut surfaces and edges can cause skin irritation. In general, the effect is physical and not chemical. You must take precautions to avoid excessive skin contact. Take care when organizing your work methods. Wear sleeves.
  • Page 20 INTRODUCTION Gasoline for engines may contain a considerable quantity of benzene, which is toxic if inhaled. You must keep con- centrations of gasoline fumes low. High concentrations cause eye, nose, and throat irritation, nausea, headaches, depression, and symptoms of intoxication. Very high concentrations result in rapid loss of consciousness. Ensure that there is adequate ventilation when handling and using gasoline.
  • Page 21 INTRODUCTION Wear a respirator when using sandblasting equipment, working with asbestos-based materials, or using spraying equipment. Glues See Adhesives and sealants. Oil test equipment, lubrication test equipment, and high-pressure air test equipment, in accordance with local legislation See Lubricants and greases. Always keep high-pressure equipment in good condition and carry out regular maintenance, particularly on connec- tions and fittings.
  • Page 22 INTRODUCTION Pressurized equipment See Oil test equipment, lubrication test equipment, and high-pressure air test equipment. Resistance welding See Welding. Sealants See Adhesives and sealants. SOLDERING See Welding. Solders are mixtures of metals whose melting point is lower than that of the constituent metals (normally lead and tin).
  • Page 23 INTRODUCTION Never improvise a hoist mechanism. Lower protective sheath See Anti-corrosive protection. WELDING See Gas cylinders, Fire, and Electric shock. Welding processes include resistance welding (spot welding??), arc welding, and gas welding. Resistance welding This process can throw out molten metal particles at high speed, so you must protect your eyes and skin. Arc welding This process emits a high level of ultraviolet radiation that can burn the eyes and skin of the welder and of other people nearby.
  • Page 24 INTRODUCTION HELPFUL HINTS Avoid filling tanks using unsuitable containers or inappropriate pressurised fuel delivery systems which may cause considerable spillage. In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of them contain substances which can be harmful to your health. Modern oils contain additives.

  • Page 25: Safety Rules

    INTRODUCTION Safety rules Personal safety This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible death or injury. Throughout this manual and on machine safety signs, you will find the signal words DANGER, WARNING, and CAU- TION followed by special instructions.

  • Page 26: Safety Rules - Ecology And The Environment

    Improper disposal of batteries can contaminate the soil, groundwater, and waterways. NEW HOLLAND strongly recommends that you return all used batteries to a NEW HOLLAND dealer, who will dispose of the used batteries or recycle the used batteries properly. In some countries, this is a legal requirement.

  • Page 27: Basic Instructions - Shop And Assembly

    Only use CNH Original Parts or NEW HOLLAND Original Parts. Only genuine spare parts guarantee the same quality, duration, and safety as original parts, as they are the same parts that are assembled during standard production. Only CNH Original Parts or NEW HOLLAND Original Parts can offer this guarantee.
  • Page 28 W0111A Special tools The special tools that NEW HOLLAND suggests and illustrate in this manual have been specifically researched and designed for use with NEW HOLLAND machines. The special tools are essential for reliable repair operations. The special tools are accurately built and rigorously tested to offer efficient and long-lasting operation.

  • Page 29: Torque - Minimum Tightening Torques For Normal Assembly

    INTRODUCTION Torque - Minimum tightening torques for normal assembly METRIC NON-FLANGED HARDWARE NOM. LOCKNUT LOCKNUT SIZE CL.8 CL.10 CLASS 8.8 BOLT and CLASS 10.9 BOLT and W/CL8.8 W/CL10.9 CLASS 8 NUT CLASS 10 NUT BOLT BOLT PLATED PLATED UNPLATED UNPLATED W/ZnCr W/ZnCr 2.2 N·m (19 lb...
  • Page 30 INTRODUCTION METRIC FLANGED HARDWARE NOM. CLASS 8.8 BOLT and CLASS 10.9 BOLT and LOCKNUT LOCKNUT SIZE CLASS 8 NUT CLASS 10 NUT CL.8 CL.10 W/CL8.8 W/CL10.9 BOLT BOLT PLATED PLATED UNPLATED UNPLATED W/ZnCr W/ZnCr 2.4 N·m (21 lb 3.2 N·m (28 lb 3.5 N·m (31 lb 4.6 N·m (41 lb 2.2 N·m (19 lb...
  • Page 31 INTRODUCTION 1. Manufacturer's Identification 2. Property Class 3. Clock Marking of Property Class and Manufacturer's Identification (Optional), i.e. marks 60° apart indicate Class 10 properties, and marks 120° apart indicate Class 8. INCH NON-FLANGED HARDWARE LOCKNUT LOCKNUT NOMINAL SAE GRADE 5 BOLT SAE GRADE 8 BOLT GrB W/ Gr5 GrC W/ Gr8...
  • Page 32 INTRODUCTION INCH FLANGED HARDWARE NOM- LOCKNUT LOCKNUT SAE GRADE 5 BOLT and SAE GRADE 8 BOLT and INAL GrF W/ Gr5 GrG W/ Gr8 SIZE BOLT BOLT UNPLATED PLATED UNPLATED PLATED or PLATED W/ZnCr or PLATED W/ZnCr SILVER GOLD SILVER GOLD 12 N·m (106 lb 13 N·m (115 lb...
  • Page 33 INTRODUCTION Inch Lock Nuts, All Metal (Three optional methods) 20090268 Grade Identification Grade Corner Marking Method (1) Flats Marking Method (2) Clock Marking Method (3) Grade A No Notches No Mark No Marks Grade B One Circumferential Notch Letter B Three Marks Grade C Two Circumferential Notches...

  • Page 34: Torque - Standard Torque Data For Hydraulics

    INTRODUCTION Torque - Standard torque data for hydraulics Installation of adjustable fittings in straight thread O-ring bosses 1. Lubricate the O-ring by coating it with a light oil or petroleum. Install the O-ring in the groove adjacent to the metal backup washer which is assembled at the extreme end of the groove (4).
  • Page 35 INTRODUCTION Pipe thread fitting torque Thread size Torque (maximum) 1/8-27 13 N·m (10 lb ft) Before installing and tightening pipe fittings, clean the 1/4-18 16 N·m (12 lb ft) threads with a clean solvent or Loctite cleaner and apply 3/8-18 22 N·m (16 lb ft) sealant L ®...

  • Page 36: Consumables

    LIFE COOLANT mixed with 50% de água PAG-E13 Air-conditioning compressor oil As required Óleo de baixa viscosidade SP10 Viscosidade ISO100 NEW HOLLAND AMBRA GR-9 Grease and bearing housings As required NLGI2, Li-Ca MULTI-PURPOSE GREASE 209 L (55 US gal) Main fuel reservoir...
  • Page 37 A list of the oils and lubricants recommended for your ma- chine is available on a decal fixed to the left-hand side of the engine water radiator. Contact your NEW HOLLAND dealer to get a new decal if it is damaged or illegible.
  • Page 38 Torque - Standard torque data for hydraulics Sealant Loctite® 565™ PST Torque - Standard torque data for hydraulics Loctite® 545™ Torque - Standard torque data for hydraulics NEW HOLLAND AMBRA Consumables MASTERGOLD™ HSP ENGINE OIL SAE 10W-30 NEW HOLLAND AMBRA Consumables MASTERGOLD™...
  • Page 39 48079508 27/07/2017...
  • Page 40 SERVICE MANUAL Engine T7.150 PIN HCCZ, With cab, Tier 0, Exported, 15x12 T7.150 PIN HCCZ, Without cab, Tier 0, Exported, 15x12 T7.180 PIN HCCZ, With cab, Tier 0, Exported, 15x12 T7.180 PIN HCCZ, Without cab, Tier 0, Exported, 15x12 48079508 27/07/2017...
  • Page 41 Contents Engine - 10 [10.216] Fuel tanks ................10.1 [10.218] Fuel injection system .
  • Page 42 CONSUMABLES INDEX Consumable Reference PAGE NEW HOLLAND AMBRA Engine cooling system - Filling 10.3 / 5 ACTIFULL™ OT EXTENDED LIFE COOLANT 48079508 27/07/2017...
  • Page 43 48079508 27/07/2017...
  • Page 44 Engine - 10 Fuel tanks - 216 T7.150 PIN HCCZ, With cab, Tier 0, Exported, 15x12 T7.150 PIN HCCZ, Without cab, Tier 0, Exported, 15x12 T7.180 PIN HCCZ, With cab, Tier 0, Exported, 15x12 T7.180 PIN HCCZ, Without cab, Tier 0, Exported, 15x12 48079508 27/07/2017 10.1 [10.216] / 1...
  • Page 45 Contents Engine - 10 Fuel tanks - 216 SERVICE Fuel tank Drain fluid ................. 3 Remove .
  • Page 46 Engine - Fuel tanks Fuel tank - Drain fluid 1. Park the machine on a level and hard surface. 2. Place a suitably sized container under the component. 3. Remove the plug (1) to drain the fluid. 4. Dispose of the collected fluid in an appropriate man- ner.
  • Page 47 Engine - Fuel tanks Fuel tank - Remove WARNING Heavy objects! Lift and handle all heavy components using lifting equipment with adequate capacity. Always support units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders. Failure to comply could result in death or serious injury.
  • Page 48 Engine - Fuel tanks 4. Remove the nut (2). Where fitted, remove the screw (1) and remove the ladder (3) from the left-hand side. BRAG12TRLUE1344 5. Disconnect the electrical connectors (1) from the fuel tank float. Remove the mounting bolts (2). Remove the float.
  • Page 49 Engine - Fuel tanks 8. Loosen retaining nuts (1) and (2) from the tank bracket plate to facilitate fuel tank removal. Remove the fuel tank. BRAG12TRLUE1334 Next operation: Fuel tank - Install (10.216). 48079508 27/07/2017 10.1 [10.216] / 6...
  • Page 50 Engine - Fuel tanks Fuel tank - Install WARNING Heavy objects! Lift and handle all heavy components using lifting equipment with adequate capacity. Always support units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders. Failure to comply could result in death or serious injury.
  • Page 51 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...

This manual is also suitable for:

T7.180

Table of Contents