Lubricant And Coolant Specification - New Holland T7030 Operator's Manual

LUBRICANT AND COOLANT SPECIFICATION

RECOMMENDED FLUIDS AND
APPLICATIONS
Engine Oil
Ambra Mastergold HSP (15W--40)
Ambra Mastergold HSP (10W--30)
Transmission, Rear Axle and
Hydraulic System Oil
Ambra Multi G (10W30)
(
-- Power Command All models)
Front Wheel Drive Oil
Ambra Multi G (10W30)
-- Axle (All models)
-- Hubs (w/out brakes, per hub)
-- Hubs (with brakes, per hub)
Front P.T.O. Gearbox Oil
Ambra Multi G (10W30)
Engine Radiator Coolant
System Capacity
*Water
Ambra Agriflu
Air Conditioning Compressor Oil
Low Viscosity Oil SP10
Brake / Clutch Fluid
Ambra LHM Brake
Grease Fittings and Bearings
Ambra GR9
*NOTE Use antifreeze (50%) plus clean, soft water (50%). In order to reduce deposits and corrosion, water used
in the cooling system should not exceed the following limits:
SECTION 4 - - LUBRICATION AND MAINTENANCE
New Holland
Specification
NH 330 H
NH 324 H
NH 410 B
NH 410 B
NH 410B
NH 900 A
n/a
NH 610 A
NH 710 A
International
Specification
ACEA E7/E5
API CI--4CH--4
CUMMINS
CES20078/77/76/72
API GL4, ISO 32/46
API GL4, ISO 32/46
API GL4, ISO 32/46
Ethylene Glycol
PAG--E13, ISO100 Viscosity
ISO 7308
NLGI 2
Approximate
Quantities
15 Litres (3.96 U.S. gals.)
100 Litres (26.4 U.S. gal)
14 Litres (14.8 U.S. qts.)
2.15 Litres (2.3 U.S. qts.)
As Required
26 Litres (6.9 U.S. gal.)
50%
50%
As Required
As Required
As Required
4--9