External 3-Point Hitch Controls - New Holland T7030 Operator's Manual

EXTERNAL 3- -POINT HITCH CONTROLS
(where fitted)
Two external switches (1) are provided on each rear
fender assembly. Depress the upper switch to raise
the 3--point hitch, depressing the lower switch will
cause the hitch to drop.
WARNING
Do not stand on or near the implement or between
the implement and tractor when operating the
external 3--point hitch controls.
Before leaving the tractor to operate the external
controls:
Move all transmission controls to neutral.
•
Disengage the P.T.O.
•
Apply the parking brake.
•
With the engine running, move the hand throttle lever
to the low idle position (fully rearwards).
WARNING
Before using the external 3--point hitch controls,
ensure that no person or object is in the area of the
implement or 3-point hitch.
Never operate the external controls while standing:
Directly behind the tractor or tyres.
•
Between the lower links.
•
On or near the implement.
•
WARNING
Never extend arms, legs, any part of the body or any
object into the area near the 3-point hitch or
implement while operating the external controls.
SECTION 3 - - FIELD OPERATIONS
104
105
3--67