Operation 15 - Check Transmission/Rear Axle And Hydraulic Oil Level - New Holland T7030 Operator's Manual

Hide thumbs Also See for T7030:
Table of Contents

Advertisement

OPERATION 15
CHECK
TRANSMISSION/REAR
HYDRAULIC OIL LEVEL
Check the oil level with the tractor parked on a level
surface, with all cylinders extended and the engine
shut off for at least five minutes.
Check the oil level in the sight glass on the left hand
side of the rear axle housing. Ensure that the the oil
level is between the high and low marks (1), in the
sight glass.
If necessary , remove the filler cap (1) and add oil, as
required.
See page 4--8 for the correct oil specification.
IMPORTANT: Park the tractor on level ground and,
where applicable, extend all cylinders before
checking oil levels. With some front/rear wheel
combinations, it may be necessary to raise the front
or rear of the tractor to ensure it is level before
checking the oil.
SECTION 4 - - LUBRICATION AND MAINTENANCE
AXLE
AND
57
58
4--31

Advertisement

Table of Contents
loading

This manual is also suitable for:

T7040T7060T7050

Table of Contents