OPERATION 31
CHANGE ENGINE AIR CLEANER INNER
ELEMENT
The air cleaner is accessible from the right--hand
side of the engine
1. Unlatch the three retaining clips (1) Fig. 92, and
lift off the air cleaner assembly cover.
2. Remove the outer element (1) Fig. 93 from the
air cleaner assembly by gently twisting the end
of the filter clockwise to disengage the seal. Then
pull the filter straight out of the housing ,not at an
angle, ensuring the inner element remains in
place.
NOTE: Examine the inside of the outer element. If
dust is present, the outer element is defective and
must be replaced.
3. Pull the inner element straight out of the housing
and dispose of properly.
4. Clean the inside of the air cleaner housing using
a damp lint--free cloth.
5. Install a new inner element and a new outer
element (if required). Ensure both elements are
correctly seated before replacing the housing
cover.
IMPORTANT: Failure to install the inner filter
element properly could result in engine damage.
Therefore it is recommended that the element be
installed by an authorised dealer.
4--50
SECTION 4 - - LUBRICATION AND MAINTENANCE
92
93
94