INTELLIVIEW II MONITOR
(where fitted)
The optional Intelliview II monitor provides a
comprehensive range of information on tractor
operating functions.
It can also be used to store, process and display
information relating to applications and work
environments.
USB Port
A USB port is located at the top of the left--hand cab
'C' pillar. This port is a direct link to the monitor and
provides the ability to upload and download
information between the monitor and a USB storage
device.
NOTE: Details on the operation of the monitor and
ISO electrical system can be found in the Intelliview
II Operator's Manual.
ISO Connector
Implements equipped with an ISO standard
electronic control unit/s can be connected to the
monitor via the multi--pin ISO connector at the rear
of the tractor.
6--2
SECTION 6 - - ACCESSORIES
2
3
4