Front 3-Point Hitch - New Holland T7030 Operator's Manual

FRONT 3- -POINT HITCH (where fitted)
The optional front hitch, consists of an adjustable top
link (1) and a pair of folding lower links (2). The top
link and the lower links have open claw ends that
permit rapid coupling and uncoupling of implements.
The claws are equipped with self-locking latches to
ensure positive retention of the 3--point hitch to the
implement.
The front hitch can be operated by a rear or
mid--mount remote valve (where fitted). The height
of the hitch (1) can be shown in the Central Display
as a percentage (%) ranging from 0 (fully lowered) to
100 (full raise).
Three ball-bushings are supplied for installation on the
implement, if required. The ball-bushing with projecting
lips (1) should be installed on the implement upper
hitch pin. The two plain ball-bushings (3) with their
detachable guides (2) should be installed on the
implement lower hitch pins.
SECTION 3 - - FIELD OPERATIONS
56
57
58
3--45