Battery Removal
NOTE: If the battery is being removed, disconnect
the battery leads before proceeding further. Always
disconnect the lead from the negative terminal (1)
first, place in a safe position and then disconnect the
positive (+) lead.
1. Loosen the nuts (2) on the battery strap until the
strap can be unhooked from the carrier base.
2. Remove the set screws (4) from the side plate (3)
and lift off, taking care not to trap or damage the
wiring on the Maxi Fuse block.
3. Slide the battery out of the carrier.
CAUTION
Tractor batteries are very heavy, ensure the battery
is safely supported during the removal process.
To refit the battery, reverse the above procedure.
Ensure battery leads and cables are positioned so
they do not become trapped or chafe on a sharp
edges.
Refit the battery cover.
SECTION 4 - - LUBRICATION AND MAINTENANCE
85
4--45