Right-Hand Side Controls; Parking Brake - New Holland Workmaster 50 Operator's Manual

RIGHT-HAND SIDE CONTROLS

Parking brake

1. The "T" shaped park brake handle (1) is used in con-
junction with the foot brakes.
2. To apply the park brake, first pull up the "T" handle and
lock the "T" shaped handle in place by rotating 90 °
3. Then press the brake pedals firmly and release after
ensuring the pawl of the park brake is locked in one of
the teeth of ratchet provided on the foot brake pedal
lever.
4. To release the park brake, press the foot brake pedal,
rotate the "T" handle 90 °and release the handle and
foot brake pedal.
NOTICE: Ensure that the park brake is fully released be-
fore driving the tractor.
NOTE: Always apply the park brake when getting off of
the tractor. If the park brake is not applied or operator
leaves the seat without applying the park brake a warning
buzzer will sound for approximately ten seconds.
3 - CONTROLS AND INSTRUMENTS
3-18
1
86090119N