Channel Settings; Figure 6-16: Network Settings Screen - AudioCodes Mediant 2000 User Manual
Sip voip gateway
Hide thumbs
Also See for Mediant 2000:
- User manual (702 pages) ,
- Installation manual (44 pages) ,
- Hardware installation manual (30 pages)
Table of Contents
Advertisement
6.2.9.2
Channel Settings
$ To set Channel Settings, take the following 3 steps:
Step 1
On the sub-menu bar on the top, click the Channel Settings option. The Channel
Settings screen appears.
Step 2
In the Channel Settings screen, you can enter or modify the Gateway's channel
parameters such as Input & Output voice gain, Jitter buffer characteristics, Modem,
Fax and DTMF transport modes, etc. These parameters apply to all Gateway ports.
Step 3
At the bottom of the screen, click the Submit button. The screen is refreshed.
Mediant 2000/SIP
Figure 6-16: Network Settings Screen
88
Mediant 2000/SIP
Document #: LTRT-00688
Advertisement
Table of Contents
