Removing A Slot Bracket - Fujitsu PRIMERGY TX1310 M3 Upgrade And Maintenance Manual

Expansion cards and backup units
9.2.2

Removing a slot bracket

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Hexagon nut 5 mm (for hexagon bolt)
Removing the slot bracket
Ê Remove all screws.
Ê Remove the controller from the mounting tabs on the slot bracket.
112 Upgrade and Maintenance Manual
Hardware: 5 minutes
TX1310 M3