Figure 5-15: Lpt Cable Connection - IEI Technology PICOe-945GSE User Manual

PICOe-945GSE Half-Size CPU Card
Step 2: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the PICOe-945GSE LPT box-header connector. See
Step 3: Insert the cable
the 26-pin box-header connector on the PICOe-945GSE, connect the cable
connector to the on-board connector. See

Figure 5-15: LPT Cable Connection

Step 4: Attach the LPT connector to the chassis. To secure the LPT interface
connector to the chassis please refer to the installation instructions that came
with the chassis.
Step 5: Connect LPT device. Once the LPT interface connector is connected to the
chassis, the LPT device can be connected to the LPT interface connector. See
F igure 5-16Step 0:\
8 2 1 H
connectors. Once the cable connector is properly aligned with
F igure 5-15.
8 2 0 H
F igure 5-15.
8 1 9 H
Page 83