Figure 5-4: At Power Select Jumper Location; Table 5-3: Cf Card Setup Jumper Settings - IEI Technology PICOe-945GSE User Manual

AT Power Select
Short 1 – 2
Open
Table 5-2: AT Power Select Jumper Settings
The location of the AT Power Select jumper is shown in

Figure 5-4: AT Power Select Jumper Location

5.5.2 CF Card Setup
Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in
CF Card Setup
Open
Closed

Table 5-3: CF Card Setup Jumper Settings

The CF Card Setup jumper location is shown in
Page 68
PICOe-945GSE Half-Size CPU Card
Description
Use AT power Default
Use ATX power
JCF1
2-pin header
See T able 5-3
7 9 2 H
See F igure 5-5
7 9 3 H
Description
Slave Default
Master
F igure 5-5.
7 9 5 H
F igure 5-4 below.
7 9 1 H
T able 5-3.
7 9 4 H