Parallel Port Cable; Figure 5-16: Lpt Cable Connection - IEI Technology WSB-9152 User Manual

WSB-9152 PICMG 1.0 SBC

5.6.6 Parallel Port Cable

The optional parallel port (LPT) cable respectively connects the onboard LPT 26-pin box
header to an external LPT device (like a printer). The cable comprises a 26-pin female
header, to be connected to the onboard LPT box-header, on one side and on the other
side a standard external LPT connector. To connect the LPT cable, please follow the
steps below.
Step 1: Locate the connector. The LPT connector location is shown in Chapter 4.
Step 2: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the WSB-9152 LPT box-header connector. See Figure 5-16.
Step 3: Insert the cable
the 26-pin box-header connector on the WSB-9152, connect the cable
connector to the onboard connector. See Figure 5-16.

Figure 5-16: LPT Cable Connection

Step 4: Attach the LPT connector bracket to the chassis. The LPT cable connector is
connected to a standard external LPT interface connector. To secure the LPT
interface connector to the chassis please refer to the installation instructions that
came with the chassis.
connectors. Once the cable connector is properly aligned with
Page 93