Cf Card Installation - IEI Technology PICOe-945GSE User Manual

PICOe-945GSE Half-Size CPU Card
Step 2: Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a
way that the notch in the middle of the SO-DIMM must be aligned with the
plastic bridge in the socket.
Step 3: Insert the SO-DIMM. Push the SO-DIMM chip into the socket at an angle. (See
F igure 5-1)
7 8 4 H
Step 4: Open the SO-DIMM socket arms. Gently pull the arms of the SO-DIMM socket
out and push the rear of the SO-DIMM down. (See
Step 5: Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the

5.4.2 CF Card Installation

NOTE:
The PICOe-945GSE can support both CF Type I cards and CF Type II
cards. For the complete specifications of the supported CF cards
please refer to Chapter 2.
To install the a CF card (Type I or Type II) onto the PICOe-945GSE, please follow the
steps below:
Step 1: Locate the CF card socket. Place the PICOe-945GSE on an anti-static pad
with the solder side facing up. Locate the CF card.
Step 2: Align the CF card. Make sure the CF card is properly aligned with the CF
socket.
Step 3: Insert the CF card. Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See
F igure 5-1)
7 8 5 H
socket.Step 0:
F igure 5-2.
7 8 6 H
Step 0:
Page 65