Analog Crt Graphics Mode; Lvds Interface - IEI Technology PICOe-945GSE User Manual

Microsoft DirectX* 9.1 operating system
Intermediate Z in Classic Rendering
Internal Graphics Display Device States: D0, D1, D3
Graphics Display Adapter States: D0, D3.

2.4.3.1 Analog CRT Graphics Mode

The analog CRT bus is interfaced to an external DB-15 interface connector. The
connector is shown below.
Figure 2-8: VGA Connector
Some of the features of the CRT include:
Integrated 400-MHz RAMDAC
Analog Monitor Support up to QXGA
Support for CRT Hot Plug

2.4.3.2 LVDS Interface

The LVDS interface is connected directly to the LVDS connector on the board. Some of
the features of the LVDS interface include:
Page 16
PICOe-945GSE Half-Size CPU Card