Figure 5-9: Pcie Status Select Jumper Pinout Locations; Backplane Installation - IEI Technology PICOe-945GSE User Manual

Figure 5-9: PCIe Status Select Jumper Pinout Locations

5.6 Chassis Installation
5.6.1 Airflow
WARNING:
Airflow is critical to the cooling of the CPU and other onboard
components. The chassis in which the PICOe-945GSE must have air
vents to allow cool air to move into the system and hot air to move out.
The PICOe-945GSE must be installed in a chassis with ventilation holes on the sides
allowing airflow to travel through the heat sink surface. In a system with an individual
power supply unit, the cooling fan of a power supply can also help generate airflow
through the board surface.

5.6.2 Backplane Installation

Before the PICOe-945GSE can be installed into the chassis, a backplane must first be
installed. Please refer to the installation instructions that came with the backplane and the
chassis to see how to install the backplane into the chassis.
Page 74
PICOe-945GSE Half-Size CPU Card