Figure 5-11: 7.1 Channel Audio Kit - IEI Technology PICOe-945GSE User Manual

Half-size pcie cpu card with intel atom processor, 512 mb on-board memory, vga/lvds/hdtv-out dual gbe, seven usb 2.0, cf slot and two sata

Table of Contents

The optional 7.1 channel audio kit connects to the 10-pin audio connector on the

PICOe-945GSE. The audio kit consists of five audio jacks. One audio jack, Mic In,

connects to a microphone. The remaining four audio jacks, Line-In, Front-Out, Rear-Out,

and Center Subwoofer, connect to speakers. To install the audio kit, please refer to the

steps below:

Step 1:

Connect the audio kit cable. The audio kit is shipped with a cable that

connects the audio kit to the PICOe-945GSE. Connect the cable to the

connector on the back of the audio kit. Make sure the pins are properly aligned

(i.e. pin 1 connects to pin 1).

Step 2:

Locate the audio connector. The location of the 10-pin audio connector is

shown in Chapter 3.

Step 3:

Align pin 1. Align pin 1 on the on-board connector with pin 1 on the audio kit

cable connector. Pin 1 on the audio kit cable connector is indicated with a white

dot. See

F igure 5-11.

8 1 4 H

Figure 5-11: 7.1 Channel Audio Kit

Step 4:

Mount the audio kit onto the chassis. Once the audio kit is connected to the

Page 78

PICOe-945GSE Half-Size CPU Card

Table of Contents

Table of Contents