Figure 4-3: Atx Power Supply Enable Connector Location; Table 4-3: Atx Power Supply Enable Connector Pinouts - IEI Technology PICOe-945GSE User Manual

PICOe-945GSE Half-Size CPU Card
4.2 Internal Peripheral Connectors
Internal peripheral connectors are found on the CPU card and are only accessible when
the CPU card is outside of the chassis. This section has complete descriptions of all the
internal, peripheral connectors on the PICOe-945GSE.
4.2.1 ATX Power Supply Enable Connector
CN Label:
CN Type:
CN Location:
CN Pinouts:
The ATX power supply enable connector enables the PICOe-945GSE to be connected to
an ATX power supply. In default mode, the PICOe-945GSE can only us an AT power
supply. To enable an ATX power supply the AT Power Select jumper must also be
configured. Please refer to Chapter 3 for more details.

Figure 4-3: ATX Power Supply Enable Connector Location

PIN NO. DESCRIPTION
1 GND
2 PS-ON
3 +5V Standby

Table 4-3: ATX Power Supply Enable Connector Pinouts

ATXCTL1
3-pin wafer (1x3)
See F igure 4-3
7 3 9 H
See T able 4-3
7 4 0 H
Page 37