Table 5-6: Lvds Voltage Selection Jumper Settings - IEI Technology PICOe-945GSE User Manual

5.5.5 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and PICOe-945GSE may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set.
J_VLVDS1 sets the voltage connected to LVDS1. The LVDS Voltage Selection jumper
settings are shown in
LCD Voltage Select
Short 1-2
Short 2-3

Table 5-6: LVDS Voltage Selection Jumper Settings

The LVDS Voltage Selection jumper location is shown in
Page 72
PICOe-945GSE Half-Size CPU Card
J_VLVDS1
3-pin header
See T able 5-6
8 0 4 H
See F igure 5-8
8 0 5 H
T able 5-6.
8 0 6 H
Description
+3.3V LVDS
+5V LVDS
Default
F igure 5-8.
8 0 7 H