Figure 5-18: Lan Connection; Ps/2 Y-Cable Connection - IEI Technology PICOe-945GSE User Manual

5.8.1 LAN Connection (Single Connector)
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1: Locate the RJ-45 connectors. The locations of the USB connectors are shown
in Chapter 4.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the PICOe-945GSE. See

Figure 5-18: LAN Connection

Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector.

5.8.2 PS/2 Y-Cable Connection

The PICOe-945GSE has a PS/2 connector on the external peripheral interface panel. The
dual PS/2 connector is connected to the PS/2 Y-cable that came with the PICOe-945GSE.
One of the PS/2 cables is connected to a keyboard and the other to a mouse to the system.
Follow the steps below to connect a keyboard and mouse to the PICOe-945GSE.
Page 86
PICOe-945GSE Half-Size CPU Card
F igure 5-18.
8 5 8 H 8 2 3 H
Step 0: