Replacing The Material Hose Or Air Hose - WAGNER AC 4600 Operating Manual

EDITION 02/2009
OPERATING MANUAL
6.2

REPLACING THE MATERIAL HOSE OR AIR HOSE

1. Finishing work and cleaning.
2. Relieve spray gun and unit pressure.
3. Secure gun with trigger safety catch.
Material hose
4. Place open-ended wrench SW A on fl ats of paint connection and counterhold.
5. Turn nut to the right with open-ended wrench SW B and unscrew material hose.
Air hose
4. Place open-ended wrench SW D on fl ats of air connection and counterhold.
5. Turn nut to the right with open-ended wrench SW C and unscrew air hose.
6. Mounting:
Fit the material hose respectively air hose by hand and tighten with 2 open-ended
wrenches.
Counterhold
A
B
Description
AC 4600 Professional NPS 1/4"
PART NO. DOC394871
Counterhold
B_02703
Key A
SW 17 mm
0.669 inch
D
C
B_02704
Key B Key C
SW 19 mm SW 17 mm
0.748 inch 0.669 inch
AC 4600 Pro
Note:
Do not unscrew the fi lter
housing. The nut must only be
unscrewed by WAGNER- Serv-
ice-Agency.
Key D
SW 14 mm
0.551 inch
26