Replacing The Product Hose Or Air Hose - WAGNER GM 4700AC Operating Manual

VERSION 06/2014
OPERATING MANUAL
8.3

REPLACING THE PRODUCT HOSE OR AIR HOSE

1. Flush and clean the gun as described in Chapter 8.1.3.
2. Relieve the pressure of gun and device.
3. Secure the gun with the locking device.
Product hose
4. Place the size A open-end wrench on the lower fl ats of the product connection and
hold it in place.
5. Unscrew the product hose nut using the size B open-end wrench.
Air hose
4. Place the size D open-end wrench on the fl ats of the air connection and hold it in
place.
5. Loosen the air hose's nut with a size C open-end wrench.
Assembly:
1. Screw on the product hose or air hose by hand and tighten with the two open-end
wrenches.
A
B
Description
GM 4700AC with NPS1/4" fi lter
ORDER NUMBER DOC2311730
B_02385
Wrench A
Width across
fl ats
19 mm
0.75 inch
D
C
P_02386
Wrench B
Width across
fl ats
19 mm
0.75 inch
GM 4700AC
Note:
Do not unscrew the fi lter
connection. The fi lter
connection should be
replaced in accordance with
Chapter 10.8.
Wrench C Wrench D
Width across Width across
fl ats
17 mm 17 mm
0.67 inch 0.67 inch
fl ats
41