Replacing The Material Hose Or Air Hose - WAGNER GM 4700AC-H Translation Of The Original Operating Manual

VERSION 09/2011
OPERATING MANUAL
6.2

REPLACING THE MATERIAL HOSE OR AIR HOSE

1. Decommissioning work and cleaning
2. Relieve the pressure of gun and unit.
3. Secure gun with locking device.
Material hose
4. Place size A open-ended wrench on the lower fl ats of the material connection and
counter hold it.
5. Loosen the material hose's nut with a size B open-ended wrench.
Air hose
4. Place size D open-ended wrench on the fl ats of the air connection and counter
hold it.
5. Loosen the air hose's nut with a size C open-ended wrench.
Assembly:
1. Fit the material hose or air hose by hand and tighten with the two open-ended
wrenches.
A
B
B_02385
Description
GM 4700AC with fi lter NPS1/4"
2311730
ORDER NUMBER DOC
D
C
Spanner A Spanner B
Wrench size Wrench size
19 mm 19 mm
0.75 inch 0.75 inch
GM 4700AC
Note:
Do not unscrew the fi lter
housing.
may only be unscrewed by
WAGNER- Service-Agency.
P_02386
Spanner c Spanner D
Wrench size Wrench size
17 mm 17 mm
0.67 inch 0.67 inch
The upper nut
26