Table of Contents
Advertisement
EDITION 02/2008
OPERATING MANUAL
6.2
REPLACING THE MATERIAL HOSE OR AIR HOSE
1. Finishing work and cleaning.
2. Relieve spray gun and unit pressure.
3. Secure gun with trigger safety catch.
Paint hose
4. Place open-ended wrench SW A on fl ats of paint connection and counter hold.
5. Turn nut to the right with open-ended wrench SW D and unscrew material hose.
Air hose
4. Place open-ended wrench SW D on fl ats of air connection and counter hold.
5. Turn nut to the right with open-ended wrench SW C and unscrew air hose.
6. Assembly:
Fit the material hose respectively air hose by hand and tighten with 2 open-ended
wrenches.
Counter hold
A
B
Description
GM 4600AC with fi lter NPS1/4"
Part No. DOC394861
B_02678
Key A
SW 17 mm
0.669 inch
Counter hold
D
C
B_02679
Key B
Key C
SW 19 mm
SW 17 mm
0.748 inch
0.669 inch
GM 4600AC
Note:
Do not unscrew the fi lter
housing. The nut must only be
unscrewed by WAGNER- Serv-
ice-Agency.
Key D
SW 14 mm
0.551 inch
26
Advertisement
Table of Contents
