Replacing The Material Hose Or Air Hose - WAGNER AC 4600 Professional Operating Manual

EDITION 06/2012
OPERATING MANUAL
6.2

REPLACING THE MATERIAL HOSE OR AIR HOSE

1. Finishing work and cleaning.
2. Relieve spray gun and unit pressure.
3. Secure gun with trigger safety catch.
Material hose
4. Place open-ended wrench wrench size A on fl ats of paint connection and counterhold.
5. Turn nut to the right with open-ended wrench wrench size B and unscrew material
hose.
Air hose
4. Place open-ended wrench wrench size D on fl ats of air connection and counterhold.
5. Turn nut to the right with open-ended wrench wrench size C and unscrew air hose.
6. Mounting:
Fit the material hose respectively air hose by hand and tighten with 2 open-ended
wrenches.
Counterhold
A
B
Description
AC 4600 Professional NPS 1/4"
PART NO. DOC394871
Counterhold
B_02703
Key A
wrench size
17 mm
0.67 inch
D
C
B_02704
Key B Key C
wrench size wrench size
19 mm 17 mm
0.75 inch 0.67 inch
AC 4600 Pro
Note:
Do not unscrew the fi lter
housing. The nut must only be
unscrewed by WAGNER- Serv-
ice-Agency.
Key D
wrench size
14 mm
0.55 inch
26